Frymaster KSCF18G Series User Manual download pdf (Page 47)

KSCF18G COOL ZONE SERIES GAS FRYERS

CHAPTER 7: TROUBLESHOOTING

7-5

7.2 Fryer Troubleshooting (cont.)

7.2.6

Main burner malfunctions.

A. Main burner will not ignite; no gas is

present at main burner.

1. Check that float switch is not stuck

in the "down" position.

2. Check and reset the high-limit

switch.

3. The combination gas valve and/or

electronic ignition system may be

defective; contact an authorized

service technician for service.

B. Main burner flames are small and

appear lazy; shortening does not come

up to temperature quickly. Contact an

authorized service technician for

service.

C. Fryer will not reach setpoint

temperature and/or runs erratically.

1. Incorrect location or adjustment of

sensor probe. Contact an authorized

service technician for service.

2. Defective temperature sensor. Contact

an authorized service technician for

service.

D. Fryer shortening temperature cannot be

controlled; fryer runs at high-limit

temperature. Possible causes are:

1. Defective operating thermostat.

Contact an authorized service

technician for service.

2. Defective temperature probe.

Contact an authorized service

technician for service.

1 2 ... 42 43 44 45 46 47 48 49 50 51 52 ... 89 90

No comments

Frymaster KSCF18G Series User Manual Page 47