Frymaster RE E4 User Manual download pdf (Page 7)

1-3

QUALIFIED INSTALLATION PERSONNEL

Qualified installation personnel are individuals, firms, corporations, and/or companies which, either

in person or through a representative, are engaged in and are responsible for the installation of

electrical appliances. Qualified personnel must be experienced in such work, be familiar with all

electrical precautions involved, and have complied with all requirements of applicable national and

local codes.

QUALIFIED SERVICE PERSONNEL

Qualified service personnel are those who are familiar with Frymaster equipment and who have been

authorized by Frymaster, L.L.C. to perform service on the equipment. All authorized service

personnel are required to be equipped with a complete set of service and parts manuals, and to stock

a minimum amount of parts for Frymaster equipment. A list of Frymaster Factory Authorized

Service Centers (FASC) is included with the fryer when shipped from the factory. Failure to use

qualified service personnel will void the Frymaster warranty on your equipment.

1.7 Shipping Damage Claim Procedure

What to do if your equipment arrives damaged:

Please note that this equipment was carefully inspected and packed by skilled personnel before

leaving the factory. Frymaster does not assume responsibility for damage or loss incurred in transit.

The freight company assumes full responsibility for safe delivery upon acceptance of the equipment.

1. File Claim for Damages Immediately—Regardless of extent of damage.

2. Visible Loss or Damage—Be sure this is noted on the freight bill or express receipt and is signed

by the person making the delivery.

3. Concealed Loss or Damage—If damage is unnoticed until equipment is unpacked, notify the

freight company or carrier immediately and file a concealed damage claim. This should be done

within 15 days of date of delivery. Be sure to retain container for inspection.

1.8 Service Information

For non-routine maintenance or repairs, or for service information, contact your local Frymaster

Authorized Service Center (FASC). Service information may also be obtained by calling the

Frymaster Technical Services Department (1-800-24FRYER) or by e-mail at

[email protected]. The following information will be needed in order to assist you efficiently:

Model Number_________________________

Serial Number _________________________

Voltage ______________________________

Nature of the Problem___________________

____________________________________

RETAIN AND STORE THIS MANUAL IN A SAFE PLACE FOR FUTURE USE.

1 2 3 4 5 6 7 8 9 10 11 12 ... 35 36

No comments

Frymaster RE E4 User Manual Page 7